Reprap Mendel: Difference between revisions

Revision as of 00:35, 15 February 2024

prusa slicer - gcode generation software

octoprint seems to work as a print server

date		price
09/22/2023	Donated by Jack	$0
02/09/2023	Ordered a power cable	$8

@@ Line 14: / Line 14: @@
 https://reprap.org/wiki/RAMPS_1.4
-```
+#define STRING_CONFIG_H_AUTHOR "Marco" // Who made the changes.
-diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
-index 4f93a4de48..e5c06e2f73 100644
+#define BED_MINTEMP        -20
---- a/Marlin/Configuration.h
-+++ b/Marlin/Configuration.h
-@@ -61,7 +61,7 @@
- // @section info
- // Author info of this build printed to the host during boot and M115
+#define INVERT_X_DIR true
--#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-+#define STRING_CONFIG_H_AUTHOR "Marco" // Who made the changes.
- //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
- /**
-@@ -626,7 +626,7 @@
- #define HEATER_5_MINTEMP   5
- #define HEATER_6_MINTEMP   5
- #define HEATER_7_MINTEMP   5
--#define BED_MINTEMP        5
-+#define BED_MINTEMP        -20
- #define CHAMBER_MINTEMP    5
- // Above this temperature the heater will be switched off.
-@@ -1668,7 +1668,7 @@
- // @section motion
- // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
--#define INVERT_X_DIR false
-+#define INVERT_X_DIR true
- #define INVERT_Y_DIR true
- #define INVERT_Z_DIR false
- //#define INVERT_I_DIR false
-```
 == History Log ==