CR805 Card Printer: Difference between revisions

Revision as of 03:07, 14 November 2024

This prints ID cards of standard CR80 dimensions.

Use 54 mm x 86 mm with 600dpi. (2.23 x 3.51 in)

Drivers are Windows only. :(

prepare your files. create a PDF of what you want to print with the following page settings: 2.23in x 3.51in 600dpi
put that sucker on a flash drive and stick it into the eMachine desktop that sits to the right of the card printer. the computer should probably be turned on.
VNC into it. the details are on the front of the computer.
open up and print as normal
NOTE: when selecting "double sided", the second side will be in monochrome. if you want both sides to be in colour, you will need to do 2 print jobs, running the card through twice. put the already once-printed card at the bottom of the stack, printed side down

TODO: put it on the network somehow so we don't have to VNC in

Service History
Name	Date	Work Done
Tara	11/13/24	Ran cleaning card, Replaced cleaning sleeve

@@ Line 27: / Line 27: @@
 # NOTE: when selecting "double sided", the second side will be in monochrome. if you want both sides to be in colour, you will need to do 2 print jobs, running the card through twice. put the already once-printed card at the bottom of the stack, printed side down
-TODO: put it on the network somehow so we don't have to VNC in. also a cleaning card needs to be run through this as its printing weird so if you dont want a potentially weird print wait until Tara gets the cleaning cards in and can run them through
+TODO: put it on the network somehow so we don't have to VNC in
+{| class="wikitable"
+|+ Service History
+|-
+! Name
+! Date
+! Work Done
+|-
+| Tara
+| 11/13/24
+| Ran cleaning card, Replaced cleaning sleeve
+|}