Brother HL-L2340DW: Difference between revisions
No edit summary |
No edit summary |
||
Line 47: | Line 47: | ||
-r--r--r-- 1 root printer 4096 Sep 28 2001 CFG-PAGE.TXT | -r--r--r-- 1 root printer 4096 Sep 28 2001 CFG-PAGE.TXT | ||
---------- 1 root printer 0 Sep 28 2001 Ready----------- | ---------- 1 root printer 0 Sep 28 2001 Ready----------- | ||
</pre> | |||
<pre> | |||
$ curl --user anonymous: ftp://192.168.50.40/CFG-PAGE.TXT | |||
<<NETWORK CONFIGURATION>> | |||
<Interface> WirelessLAN on | |||
<Node Type> Brother NC-8300w, IEEE 802.11b/g/n (Active) | |||
<Node Firmware Ver.> Firmware Ver.D (Sep 27 2014 01:34:28) | |||
<MAC Address> 2c-33-7a-12-ba-c6 | |||
<Node name> BRW2C337A12BAC6 | |||
<Active services> BRN2C337A12BAC6 | |||
BINARY_P1 | |||
TEXT_P1 | |||
POSTSCRIPT_P1 | |||
PCL_P1 | |||
BRN2C337A12BAC6_AT | |||
<Protocols> | |||
TCP/IP Enabled IPv6 Disabled | |||
NetBIOS/IP Enabled APIPA Enabled | |||
WebBasedManagement Enabled SNMP Enabled | |||
LPD Enabled Raw Port Enabled | |||
IPP Enabled WebServices Enabled | |||
SMTP Enabled FTP Enabled | |||
TFTP Enabled mDNS Enabled | |||
LLMNR Enabled Proxy Disabled | |||
<IP Settings> | |||
IP Address 192.168.50.40 (via DHCP) | |||
Subnet Mask 255.255.255.0 | |||
IP Gateway 192.168.50.1 | |||
Boot Method AUTO | |||
Boot Tries 3 | |||
IP Filter Disabled | |||
GW Timeout (sec) 21 | |||
DNS Address Config AUTO | |||
Primary DNS Server 192.168.50.1 | |||
Secondary DNS Server 0.0.0.0 | |||
<NetBIOS Name> BRW2C337A12BAC6 | |||
<WINS Address Config> AUTO | |||
<Primary WINS Server> 0.0.0.0 | |||
<Secondary WINS Server> 0.0.0.0 | |||
<Send E-mail Settings(SMTP)> | |||
Device Mail Address brn2c337a12bac6@example.com | |||
Server 0.0.0.0 | |||
Port 25 | |||
<mDNS Service Name> Brother HL-L2340D series | |||
<WebServices Name> Brother HL-L2340D series [2c337a12bac6] | |||
<SNMP Settings> | |||
Communication Mode v1/v2c(RW) | |||
<Comm. Mode> Infrastructure | |||
<Name(SSID)> InternetOfShit | |||
<Authentication Mode> WPA/WPA2-PSK | |||
<Encryption Mode> AES | |||
<Wireless Link Status> Link OK, 11n(26Mbps), Receiving Signal=2, Operating Ch=1 | |||
<Tx Power Code> Full, 227, 0, 0 | |||
<Network Statistics> <Wireless Statistics> | |||
Packets Received 64903 RX Frames Received OK 64266 | |||
Bytes Received 7701030 RX Frames Error 1467 | |||
Packets Transmitted 2825 TX Frames Transmitted OK 670298 | |||
Bytes Transmitted 585502 TX Frames Error 90 | |||
</pre> | </pre> |
Revision as of 02:33, 7 March 2024
Model: HL-L2340DW
Printer WebUI is http://192.168.50.40/general/status.html MAC is 2c:33:7a:12:ba:c6
gifted from The Bikery (via Jess)
drivers: https://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=hll2340dw_us_eu_as
`brlaser` on linux seems to work too
- https://wiki.archlinux.org/title/CUPS/Printer-specific_problems
- https://wiki.gentoo.org/wiki/Brother_networked_printer
- https://wiki.gentoo.org/wiki/Driverless_printing
Unsupported format "text/plain" -> install cups-filters
THE "MANUAL" IS AT https://support.brother.com/g/s/id/htmldoc/printer/cv_hll2300d/use/manual/index.html#GUID-CF52D2C7-FC76-4D85-94CD-21CAF1981773_159
the printer's 1line UI is surprisingly robust. use the arrows and the OK/back keys
to configure the cups network printer the URL lpd://192.168.50.40/ or ipp://192.168.50.40/ works (with the proper brlaser drivers and stuff installed)
$ nmap -Pn 192.168.50.40 Starting Nmap 7.94 ( https://nmap.org ) at 2024-03-06 18:04 PST Nmap scan report for 192.168.50.40 Host is up (0.044s latency). Not shown: 993 closed tcp ports (conn-refused) PORT STATE SERVICE 21/tcp open ftp 23/tcp open telnet 80/tcp open http 443/tcp open https 515/tcp open printer 631/tcp open ipp 9100/tcp open jetdirect Nmap done: 1 IP address (1 host up) scanned in 10.30 seconds
ftp is also enabled:
$ curl --user anonymous: ftp://192.168.50.40 total 1 -r--r--r-- 1 root printer 4096 Sep 28 2001 CFG-PAGE.TXT ---------- 1 root printer 0 Sep 28 2001 Ready-----------
$ curl --user anonymous: ftp://192.168.50.40/CFG-PAGE.TXT <<NETWORK CONFIGURATION>> <Interface> WirelessLAN on <Node Type> Brother NC-8300w, IEEE 802.11b/g/n (Active) <Node Firmware Ver.> Firmware Ver.D (Sep 27 2014 01:34:28) <MAC Address> 2c-33-7a-12-ba-c6 <Node name> BRW2C337A12BAC6 <Active services> BRN2C337A12BAC6 BINARY_P1 TEXT_P1 POSTSCRIPT_P1 PCL_P1 BRN2C337A12BAC6_AT <Protocols> TCP/IP Enabled IPv6 Disabled NetBIOS/IP Enabled APIPA Enabled WebBasedManagement Enabled SNMP Enabled LPD Enabled Raw Port Enabled IPP Enabled WebServices Enabled SMTP Enabled FTP Enabled TFTP Enabled mDNS Enabled LLMNR Enabled Proxy Disabled <IP Settings> IP Address 192.168.50.40 (via DHCP) Subnet Mask 255.255.255.0 IP Gateway 192.168.50.1 Boot Method AUTO Boot Tries 3 IP Filter Disabled GW Timeout (sec) 21 DNS Address Config AUTO Primary DNS Server 192.168.50.1 Secondary DNS Server 0.0.0.0 <NetBIOS Name> BRW2C337A12BAC6 <WINS Address Config> AUTO <Primary WINS Server> 0.0.0.0 <Secondary WINS Server> 0.0.0.0 <Send E-mail Settings(SMTP)> Device Mail Address brn2c337a12bac6@example.com Server 0.0.0.0 Port 25 <mDNS Service Name> Brother HL-L2340D series <WebServices Name> Brother HL-L2340D series [2c337a12bac6] <SNMP Settings> Communication Mode v1/v2c(RW) <Comm. Mode> Infrastructure <Name(SSID)> InternetOfShit <Authentication Mode> WPA/WPA2-PSK <Encryption Mode> AES <Wireless Link Status> Link OK, 11n(26Mbps), Receiving Signal=2, Operating Ch=1 <Tx Power Code> Full, 227, 0, 0 <Network Statistics> <Wireless Statistics> Packets Received 64903 RX Frames Received OK 64266 Bytes Received 7701030 RX Frames Error 1467 Packets Transmitted 2825 TX Frames Transmitted OK 670298 Bytes Transmitted 585502 TX Frames Error 90