Brother HL-L2340DW: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
@@@@@ PLEASE do not leave stuff on top of the printer. it WILL jam and fuck up remote printing @@@@@ | |||
Model: HL-L2340DW | Model: HL-L2340DW | ||
| Line 23: | Line 23: | ||
the printer's 1line UI is surprisingly robust. use the arrows and the OK/back keys | the printer's 1line UI is surprisingly robust. use the arrows and the OK/back keys | ||
to configure the cups network printer the URL lpd://192.168.50.40/ or ipp://192.168.50.40/ works (with the proper brlaser drivers and stuff installed) | to configure the cups network printer the URL lpd://192.168.50.40/ or ipp://192.168.50.40/ works (with the proper brlaser drivers and stuff installed). | ||
gravy: within the cups ui, use generic make, generic PCL laser type, and ipp. works on my machine | |||
<pre> | <pre> | ||
Revision as of 10:04, 15 March 2024
@@@@@ PLEASE do not leave stuff on top of the printer. it WILL jam and fuck up remote printing @@@@@
Model: HL-L2340DW
Printer WebUI is http://192.168.50.40/general/status.html MAC is 2c:33:7a:12:ba:c6
gifted from The Bikery (via Jess)
drivers: https://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=hll2340dw_us_eu_as
`brlaser` on linux seems to work too
- https://wiki.archlinux.org/title/CUPS/Printer-specific_problems
- https://wiki.gentoo.org/wiki/Brother_networked_printer
- https://wiki.gentoo.org/wiki/Driverless_printing
Unsupported format "text/plain" -> install cups-filters
THE "MANUAL" IS AT https://support.brother.com/g/s/id/htmldoc/printer/cv_hll2300d/use/manual/index.html#GUID-CF52D2C7-FC76-4D85-94CD-21CAF1981773_159
the printer's 1line UI is surprisingly robust. use the arrows and the OK/back keys
to configure the cups network printer the URL lpd://192.168.50.40/ or ipp://192.168.50.40/ works (with the proper brlaser drivers and stuff installed).
gravy: within the cups ui, use generic make, generic PCL laser type, and ipp. works on my machine
$ sudo nmap -sT -sU 192.168.50.40 Starting Nmap 7.94 ( https://nmap.org ) at 2024-03-06 18:52 PST Nmap scan report for 192.168.50.40 Host is up (0.045s latency). Not shown: 994 closed udp ports (port-unreach), 993 closed tcp ports (conn-refused) PORT STATE SERVICE 21/tcp open ftp 23/tcp open telnet 80/tcp open http 443/tcp open https 515/tcp open printer 631/tcp open ipp 9100/tcp open jetdirect 69/udp open tftp 137/udp open netbios-ns 161/udp open snmp 3702/udp open|filtered ws-discovery 5353/udp open zeroconf 5355/udp open|filtered llmnr Nmap done: 1 IP address (1 host up) scanned in 16.70 seconds
ftp is also enabled:
$ curl ftp://192.168.50.40 total 1 -r--r--r-- 1 root printer 4096 Sep 28 2001 CFG-PAGE.TXT ---------- 1 root printer 0 Sep 28 2001 Ready-----------
$ curl ftp://192.168.50.40/CFG-PAGE.TXT
<<NETWORK CONFIGURATION>>
<Interface> WirelessLAN on
<Node Type> Brother NC-8300w, IEEE 802.11b/g/n (Active)
<Node Firmware Ver.> Firmware Ver.D (Sep 27 2014 01:34:28)
<MAC Address> 2c-33-7a-12-ba-c6
<Node name> BRW2C337A12BAC6
<Active services> BRN2C337A12BAC6
BINARY_P1
TEXT_P1
POSTSCRIPT_P1
PCL_P1
BRN2C337A12BAC6_AT
<Protocols>
TCP/IP Enabled IPv6 Disabled
NetBIOS/IP Enabled APIPA Enabled
WebBasedManagement Enabled SNMP Enabled
LPD Enabled Raw Port Enabled
IPP Enabled WebServices Enabled
SMTP Enabled FTP Enabled
TFTP Enabled mDNS Enabled
LLMNR Enabled Proxy Disabled
<IP Settings>
IP Address 192.168.50.40 (via DHCP)
Subnet Mask 255.255.255.0
IP Gateway 192.168.50.1
Boot Method AUTO
Boot Tries 3
IP Filter Disabled
GW Timeout (sec) 21
DNS Address Config AUTO
Primary DNS Server 192.168.50.1
Secondary DNS Server 0.0.0.0
<NetBIOS Name> BRW2C337A12BAC6
<WINS Address Config> AUTO
<Primary WINS Server> 0.0.0.0
<Secondary WINS Server> 0.0.0.0
<Send E-mail Settings(SMTP)>
Device Mail Address brn2c337a12bac6@example.com
Server 0.0.0.0
Port 25
<mDNS Service Name> Brother HL-L2340D series
<WebServices Name> Brother HL-L2340D series [2c337a12bac6]
<SNMP Settings>
Communication Mode v1/v2c(RW)
<Comm. Mode> Infrastructure
<Name(SSID)> InternetOfShit
<Authentication Mode> WPA/WPA2-PSK
<Encryption Mode> AES
<Wireless Link Status> Link OK, 11n(26Mbps), Receiving Signal=2, Operating Ch=1
<Tx Power Code> Full, 227, 0, 0
<Network Statistics> <Wireless Statistics>
Packets Received 64903 RX Frames Received OK 64266
Bytes Received 7701030 RX Frames Error 1467
Packets Transmitted 2825 TX Frames Transmitted OK 670298
Bytes Transmitted 585502 TX Frames Error 90
Firmware updates
Brother only provides a windows and mac (and mobile) client to upload firmware: https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=hll2340dw_us_eu_as&faqid=faq00100468_001#UpdateFirmware
But I've found https://github.com/sedrubal/brother_printer_fwupd which seems to be promising
$ brother_printer_fwupd --printer=192.168.50.40 [i] Querying printer info via SNMP. [i] Detected HL-L2340D series with following firmware version(s): MAIN@1.07 [i] Querying firmware download URL from Brother update API. [i] Try to get information for firmware part MAIN@1.07 [!] Invalid response: Expected tag 'VERSIONCHECK' to be in response '<?xml version="1.0" encoding="utf-8"?> <RESPONSEINFO/>'. [i] Retry with MFC-L3750CDW hack... [i] Firmware update for MAIN to version 1.27 required. [i] Downloading firmware file. 100.0 % [i] Uploading firmware file to printer via jetdirect. [!] Could not upload firmware None to update part MAIN@1.07: service/proto not found [i] Done.