Reprap Mendel: Difference between revisions

From /dev/hack
No edit summary
No edit summary
Line 13: Line 13:


https://reprap.org/wiki/RAMPS_1.4
https://reprap.org/wiki/RAMPS_1.4
> The board has two pairs of connectors for power, one labeled 11A and the other 5A, both of these pairs are 12V connections. The 11 amps pair is used to power the heated bed. The 5 amps source is used to power the board, the rest of the printer's components and the Arduino board.  
> The board has two pairs of connectors for power, one labeled 11A and the other 5A, both of these pairs are 12V connections. The 11 amps pair is used to power the heated bed. The 5 amps source is used to power the board, the rest of the printer's components and the Arduino board.  
Currently using a PC PSU's yellow & black pins rated for 12V / 12A until I get a wire stripper for a smaller laptop power supply


#define STRING_CONFIG_H_AUTHOR "Marco" // Who made the changes.
#define STRING_CONFIG_H_AUTHOR "Marco" // Who made the changes.

Revision as of 02:20, 15 February 2024

Reprap Mendel
Status Nonoperational
Model Reprap Mendel
Point Of Contact Marco

prusa slicer - gcode generation software

octoprint seems to work as a print server

https://reprap.org/wiki/Marlin

https://reprap.org/wiki/Arduino_Mega

https://reprap.org/wiki/RAMPS_1.4

> The board has two pairs of connectors for power, one labeled 11A and the other 5A, both of these pairs are 12V connections. The 11 amps pair is used to power the heated bed. The 5 amps source is used to power the board, the rest of the printer's components and the Arduino board.

Currently using a PC PSU's yellow & black pins rated for 12V / 12A until I get a wire stripper for a smaller laptop power supply

  1. define STRING_CONFIG_H_AUTHOR "Marco" // Who made the changes.
  1. define BED_MINTEMP -20
  1. define INVERT_X_DIR true

Have to disable heated bed in octoprint

had to set baud rate in octoprint

Marlin 2.1.2.2

History Log

date price
09/22/2023 Donated by Jack $0
02/09/2023 Ordered a power cable $8